I'm looking for holster recomendations.

[joanie]

..

 

[jeeper1]

Blackhawk Serpa.
That is what I use for my model 36.
One of the nicest things is they are adjustable for cant including cross draw.

 

[WalkingWolf]

Really no drawbacks as long as that is what works for you. There are wide choices in types of holsters.

 

[cmr287]

I agree with jeeper.... Do you OC or CC. It makes a differance....

Sent from my ADR6350 using Tapatalk 2

 

[joanie]

..

 

[jeeper1]

My revolver is a 2 inch.

 

[joanie]

Do you OC or CC. It makes a differance

Open all the way for now. If I decide to CCW, I'd need to get the permit I suppose, if I wanted to do so legally. Also I wouldn't use a revolver for CCW, and not a matching pair. I'd probibly use something along the lines of a PPK, or PPKs 380.

 

[WalkingWolf]

If a holster is a open bottom it will not make any difference between a 2 inch or a 3 inch. Other than the barrel showing below the holster.

 

[joanie]

..

 

[WalkingWolf]

I don't care for nylon holsters, though I have a few. They are around the yard holsters for me. I don't care much for plastic either, but I am a leather person, I like the smell, feel, and good looks of leather. I do not use leather holsters though in rain, then it is nylon. You won't find any difference in draw with a two inch holster with a open bottom. I used open bottom for years with slide holsters for my M-39 and 1911. Also had a 3 inch m-36 at one time that I used a two inch pancake holster for. A lot of wear comes from the holster fit, if the gun moves around in the holster, loose fit, the gun will wear. Wax the inside of plastic holsters and the gun will slide better, or just keep a thin layer of oil on the gun right before holster use. I have two pvc kukri sheaths that the knives slide like glass as long as I oil them before carrying them. I use just a thin layer of gun oil.

Leather holsters if you can find a pure beeswax candle rub it inside on a warm day, or use a hair dryer. It will make the gun slide in and out like glass.

 

[marshaul]

Blackhawk Serpa.
That is what I use for my model 36.
One of the nicest things is they are adjustable for cant including cross draw.

My Serpa, a "revised" model, broke when the paddle snapped off.

I used to be a big fan, I now I say: stay away.

Leather is more comfortable, and it won't break. Leather all the way.

 

[WalkingWolf]

My Serpa, a "revised" model, broke when the paddle snapped off.

I used to be a big fan, I now I say: stay away.

Leather is more comfortable, and it won't break. Leather all the way.

Wet formed good veg tanned leather of a good weight feels, and sounds just like kydex. It is stiff and formed to the gun, as long as the owner takes care of it properly. Some leather treatment is designed to soften leather and should not be used on wet formed holsters. I use a light amount of Kiwi on smooth surfaces, and beeswax on the rough surfaces. But if holsters are rough side out, beeswax does darken the holster considerably. None of mine are rough side out, but I have heard that acrylic sealer works well without discoloring the leather.

 

[joanie]

..

 

[scott58dh]

N82 = Nate Squared Tactical

I shopped around for Holsters nearly a year before I made the decision to buy this American Made product and I have Yet to regret the Investment.

The *** N82 Tactical *** is the holster that I bought for my firearm (Ruger SP101 3" barrel) & I gotta say it is The MOST Comfortable one out there on the market. Absolutely No Part of the Firearm touches your skin & that's a great thing Not to have a Beaver Tail, Hammer, Magazine base/Grip or ANY part sticking in you side while Driving, Sitting, Bending, Laying Down &/or whatever !

I have the "Tuckable" and it's very comfortable + *Printing* is not a Major Issue with an IWB.

I can now Carry at 3 - 4 o'clock position walking/running OR at 10 o'clock when I'm driving with easy access to either location.

From their description,,, " " Comfort was our biggest motivation in the design of our unique holsters. Each Series of Nate Squared Tactical holsters are made from quality Oil-tanned leather, Neopren, and Suede leather. Each holster is hand crafted to ensure the highest quality possible. We firmly stand behind the quality & craftsmanship of every holster we build."

" The oil-tanned leather will provide a durable, yet safe contact for the handgun."

" The soft suede backing allows your skin to breathe, so even when you sweat against the holster, it will still feel cool. The natural friction coefficient of suede displaces a percentage of the weight of your firearm. This allows you to carry the firearm without it's total weight pulling down against your waistband. It is the suede that allows us to utilize a design with a single clip."

" Neoprene is sandwiched between the oil-tanned leather and the suede leather. The neoprene provides the padding to protect you from the various edges of the firearm (slide, rear sight, hammer, beavertail, etc.) even when sitting in a vehicle, but also protects your investment. Neoprene (what wetsuits are made of) is waterproof, creating a moisture barrier that will not allow sweat or skin acids to come in contact with your handgun."

Take a look, it's definitely worth the money !

LINK;:arrow: ,,, http://n82tactical.com/n82store/

Peace & Carry Safe !

 

[matt2636]

you can get something thats like a galco kingtuk holster. its the best of both worlds. i hate leather. you have to spend time to break them in and you cant reholster with one hand cause your belt will collapse your holster (thats if you are IWB) they maybe not break but they can eventually wear out. that can be bad cause i have seen that happen and it resulted in a ND because the holster ended up folding into the trigger wich caused it to fire.(he was carrying IWB) and it was a one of them galco summer comfort holsters. my serpa has never broke and im constantly trainning with it. same with my galco kingtuk. whatever you get always inspect your gear before use to make sure nothings out of wack.

 

[WalkingWolf]

you can get something thats like a galco kingtuk holster. its the best of both worlds. i hate leather. you have to spend time to break them in and you cant reholster with one hand cause your belt will collapse your holster (thats if you are IWB) they maybe not break but they can eventually wear out. that can be bad cause i have seen that happen and it resulted in a ND because the holster ended up folding into the trigger wich caused it to fire.(he was carrying IWB) and it was a one of them galco summer comfort holsters. my serpa has never broke and im constantly trainning with it. same with my galco kingtuk. whatever you get always inspect your gear before use to make sure nothings out of wack.

Complete BS IMO. The only way leather folds is if it is folded. It actually resists folding, and lets not forget on the glock the how the trigger is designed. It can't fire the weapon unless BOTH parts of the trigger are actuated. Like most ND people the owner of the gun refuses to admit he pulled the trigger. I have worked with leather and holsters for 40 years, and I can attest the claim is a lie. Though he may have convinced himself otherwise to avoid embarrassment.

Heavy weight veg tanned wet molded leather does not lose it's shape when worn in the waistband. And some manufacturers put a double layer to make sure. Take note that during the medieval age veg tanned leather was used for armor.

http://kingsleyarmoury.com/?cat=3

 

[joanie]

..

 

[WalkingWolf]

I had a uncle mikes holster for my PA-63 that the plastic belt attachment broke, I replaced it with leather. Most nylon holsters use plastic for the belt attachment.

 

[joanie]

..

 

[matt2636]

Complete BS IMO. The only way leather folds is if it is folded. It actually resists folding, and lets not forget on the glock the how the trigger is designed. It can't fire the weapon unless BOTH parts of the trigger are actuated. Like most ND people the owner of the gun refuses to admit he pulled the trigger. I have worked with leather and holsters for 40 years, and I can attest the claim is a lie. Though he may have convinced himself otherwise to avoid embarrassment.

Heavy weight veg tanned wet molded leather does not lose it's shape when worn in the waistband. And some manufacturers put a double layer to make sure. Take note that during the medieval age veg tanned leather was used for armor.

http://kingsleyarmoury.com/?cat=3

http://www.itstactical.com/warcom/f...her-holsters-can-cause-accidental-discharges/

it wasnt the exact holster i was thinking of. they will wear out if you actually wear them enough and train with it. not only that moisture can get to them (depending where you live) you may sweat as well or get cought in the rain. leather adds weight to the belt though if you a wearing a proper belt that shouldnt be a issue im just throwing that out there. plastics can be thin,weigh less, and be stronger and doesnt need a break-in like leather. check these guys out http://www.leadfarmerinc.com/ they make some good stuff and they are good people. go to a gun store and try some. we let people try out holsters before they buy them cause we dont do returns on holsters. for my opinion and for me i dont like 100% leather holsters.